What does Maillard Kinetics and the Searing Myth conclude, in numbers, about “Pinned at One Hundred Degrees: the Wet Surface, the Drying Front and a Layered Steak”?

Answer: Chapter 4 shows that the crust is the dry zone left by a drying front, which advances about 1.317 millimetres in 60 seconds at a dry face of 200 °C, while a water film of 0.1 millimetres delays browning by 24.7 seconds.

Scope of the numbers: Its parameters are illustrative; all calculations are generated by its programs; it is not medical advice, claims no health effect for any diet or cooking method, and is not food-safety guidance. Marked boxes separate published evidence, runnable Python calculations (18 programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 1.317, 200, 60

face Cdry sfront mmwater g per 100 cm2
160300.7215.53
160601.0207.82
1601201.44311.06
200300.9317.14
200601.31710.09
2001201.86214.27
240301.1028.45
240601.55811.94
2401202.20416.89
Yoo et al. 2020 water %: oven, searing, searing minus oven
whole63.0863.26+0.18
outer63.8361.09-2.74
inside65.8866.75+0.87
outer change is 3.1 times the inside change, opposite sign
Show the full program
# Chapter 4. p41: The crust is the dried-out zone, not a lid. Once the
# face is dry, a drying front recedes into the meat. Quasi-steady Stefan
# balance: heat conducted across the dry layer k_d (Ts - 100) / s boils
# the water at the front, rho_w Lv ds/dt, so s = sqrt(2 k_d dT t /
# (rho_w Lv)). Dry-layer k_d = 0.25 W/mK and water 0.73 x 1050 kg/m3
# (示意). Then the water budget is compared with the layer data of Yoo
# et al. 2020 (water %, oven versus searing, outer layer and inside).
import math

KD, RHO_W, LV = 0.25, 0.73 * 1050.0, 2.257e6
YOO = {"whole": (63.08, 63.26), "outer": (63.83, 61.09),
       "inside": (65.88, 66.75)}


def front(ts, t):
    return math.sqrt(2 * KD * (ts - 100.0) * t / (RHO_W * LV))


print(" face C  dry s   front mm   water g per 100 cm2")
for ts in (160, 200, 240):
    for t in (30, 60, 120):
        s = front(ts, t)
        print("{:7d} {:6d} {:10.3f} {:12.2f}".format(
            ts, t, 1000 * s, s * 0.01 * RHO_W * 1000))
print("Yoo et al. 2020 water %: oven, searing, searing minus oven")
for part in ("whole", "outer", "inside"):
    o, s = YOO[part]
    print("  {:7s} {:6.2f} {:6.2f} {:+6.2f}".format(part, o, s, s - o))
d_out = YOO["outer"][1] - YOO["outer"][0]
d_in = YOO["inside"][1] - YOO["inside"][0]
print("outer change is {:.1f} times the inside change, opposite sign".format(
    abs(d_out / d_in)))

Single source and citation

Fan, Y. (2026). Arrhenius Kinetics of the Maillard Reaction, Wok-Hei Combustion Aerosols and the Myth That Searing Seals in the Juices (Version 1.0.0), Chapter 4: Pinned at One Hundred Degrees: the Wet Surface, the Drying Front and a Layered Steak. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-195 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026195,
  author    = {Fan, Yafu},
  title     = {Arrhenius Kinetics of the Maillard Reaction, Wok-Hei Combustion Aerosols and the Myth That Searing Seals in the Juices},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book