What does Lid Air Damping and the Packaging Turning Point conclude, in numbers, about “Lid Air Damping: Plane Poiseuille Flow in the Slit and the Drop-Time Equation”?
Answer: The drop time of a telescoping lid is governed by plane Poiseuille flow in the slit, with the closed form \(T = 12\mu A2(L_0 S + S2/2)/(w h^3 m g)\). Between gaps of 0.20 mm and 0.50 mm the drop time changes by a factor of 15.625; the log-log slope is -3.000; the numerical solution with inertia differs from the closed form by milliseconds; above 0.50 mm the losses at entry and exit must be counted. A heavier lid falls faster, which contradicts the intuition that a lid should be both heavy and slow.
Scope of the numbers: Errors in the gap are magnified by the cube, so a conventional narrow-gap design keeps only 0.897 of its boxes inside the illustrative window; the target is a window, not "slower is better". Weight is a cue to quality, but people weigh the difference from expectation, and the score of an illustrative expectation model peaks at a ratio of actual to expected weight of 1.416.
Data table
The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: -3.000, 0.20, 0.50, 15.625
| air: viscosity 1.81 x 10^-5 Pa s, density 1.20 kg/m3, g 9.81 | |
| lid 0.20 x 0.15 m, mass 0.250 kg, overpressure 81.75 Pa | |
| engaged length 0.010 | 0.050 m, travel 0.040 m |
| gap mm T s mean v mm/s T / T(0.50) Re max | |
| 0.20 | 17.080 2.34 15.625 20.0 |
| 0.25 | 8.745 4.57 8.000 39.0 |
| 0.30 | 5.061 7.90 4.630 67.4 |
| 0.35 | 3.187 12.55 2.915 107.0 |
| 0.40 | 2.135 18.74 1.953 159.7 |
| 0.45 | 1.499 26.68 1.372 227.4 |
| 0.50 | 1.093 36.59 1.000 311.9 |
| log-log slope of T on gap | -3.000 |
| ratio T(0.20) / T(0.50) | 15.625 = 2.5 cubed |
| test band: slope -3.5 to -2.5; measured / theory 0.7 to 1.3 |
Key formula
Show the full program
# Chapter 1. p11: lid drop time from plane-Poiseuille flow in the slit.
# Model: a telescoping lid (footprint a x b) slides down over the base.
# Air under the lid leaves only through the slit between the lid skirt
# and the base wall: gap h, perimeter w = 2(a + b), engaged length L.
# Slit flow Q = w h^3 dp / (12 mu L); quasi-steady force balance
# dp A = m g; continuity Q = A v. With L = L0 + s the time to travel S:
# T = 12 mu A^2 (L0 S + S^2 / 2) / (w h^3 m g).
# Air viscosity 1.81e-5 Pa s (dry air near 20 C), density 1.20 kg/m3.
# Box geometry and lid mass are illustrative, not any real product.
import math
MU = 1.81e-5
RHO = 1.20
G = 9.81
A_SIDE, B_SIDE = 0.20, 0.15
M_LID = 0.25
L0, S = 0.010, 0.040
def drop_time(h, m=M_LID, l0=L0, s=S, a=A_SIDE, b=B_SIDE, w=None):
area = a * b
if w is None:
w = 2.0 * (a + b)
geom = math.fsum([l0 * s, 0.5 * s * s])
return 12.0 * MU * area * area * geom / (w * h ** 3 * m * G)
def end_reynolds(h, m=M_LID, l0=L0, s=S, a=A_SIDE, b=B_SIDE):
# slowest point is the end (longest slit); report the start, fastest
area = a * b
w = 2.0 * (a + b)
dp = m * G / area
q = w * h ** 3 * dp / (12.0 * MU * l0)
u = q / (w * h)
return RHO * u * h / MU, u
if __name__ == "__main__":
area = A_SIDE * B_SIDE
print("air: viscosity 1.81 x 10^-5 Pa s, density {:.2f} kg/m3,"
" g {:.2f}".format(RHO, G))
print("lid {:.2f} x {:.2f} m, mass {:.3f} kg, overpressure {:.2f} Pa"
.format(A_SIDE, B_SIDE, M_LID, M_LID * G / area))
print("engaged length {:.3f} -> {:.3f} m, travel {:.3f} m".format(
L0, L0 + S, S))
print(" gap mm T s mean v mm/s T / T(0.50) Re max")
base = drop_time(0.50e-3)
xs, ys = [], []
for hm in (0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50):
t = drop_time(hm * 1e-3)
re, _ = end_reynolds(hm * 1e-3)
xs.append(math.log(hm))
ys.append(math.log(t))
print(" {:5.2f} {:7.3f} {:9.2f} {:9.3f} {:7.1f}".format(
hm, t, S / t * 1e3, t / base, re))
n = len(xs)
mx = math.fsum(xs) / n
my = math.fsum(ys) / n
sxy = math.fsum((x - mx) * (y - my) for x, y in zip(xs, ys))
sxx = math.fsum((x - mx) ** 2 for x in xs)
print("log-log slope of T on gap: {:.3f}".format(sxy / sxx))
print("ratio T(0.20) / T(0.50) = {:.3f} = {:.1f} cubed".format(
drop_time(0.20e-3) / base, 0.50 / 0.20))
print("test band: slope -3.5 to -2.5; measured / theory 0.7 to 1.3")Single source and citation
Fan, Y. (2026). Multi-Sensory Luxury Unboxing Engineering, Lid-Friction Air-Damping Physics and Haptic Weight Price Anchoring (Version 1.0.0), Chapter 1: Lid Air Damping: Plane Poiseuille Flow in the Slit and the Drop-Time Equation. 5D Library. DOI pending
DOI pending · monograph page goes live after publication · 5DL-B-391 · v1.0.0 · CC-BY-NC-ND-4.0
BibTeX
@book{fan2026391,
author = {Fan, Yafu},
title = {Multi-Sensory Luxury Unboxing Engineering, Lid-Friction Air-Damping Physics and Haptic Weight Price Anchoring},
year = {2026},
publisher = {5D Library},
edition = {1.0.0},
note = {DOI pending}
}Other chapter answers in this book
- Chapter 2 · Slower Is Not Better: Cubic Amplification of Tolerance and the Feasible Window of Drop Time
- Chapter 3 · Paper Friction and Touch: the Slide-Angle Method, Roughness and a Sticking Skirt
- Chapter 4 · Weight, Centre of Gravity and Expectation: Honest Heft and the Size-Weight Illusion
- Chapter 5 · The Acoustics of Tearing a Seal: Perforation Pitch, the Discrete Fourier Transform and Sound Ratings
- Chapter 6 · The Turning Point of Packaging Investment, the Red Lines Against Over-Packaging and Genuine Reference Prices
- Chapter 7 · Classical Sources: the Casket and the Pearl, the Kaogongji and Veblen
- Chapter 8 · The Empirical Loop: a Weekly Five-Sense Unboxing Ledger and Field Tools and Checker Specifications