What does Spiral Coils, Golden Angles and Grounding conclude, in numbers, about “Why the Resistor Is There”?

Answer: Chapter 6 shows the resistor is a safety device: in a wiring fault a wet sleeper with no resistor can carry 230.000 mA, 100 kilohms limit it to 2.072 mA and 1 megohm to 0.227 mA; in normal use only 0.217 microamperes flow.

Scope of the numbers: Its coils, rooms, bodies and faults are illustrative models; all calculations are generated by its programs; the book is not medical or electrical-safety advice and not an installation guide. Marked boxes separate published evidence, runnable Python calculations (16 programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. printed values that match the answer: 0.227, 100, 2.072, 230.000

mainsresistorcurrent mAzone
230none, wet skin230.000fibrillation risk
230none20.909may not let go
230100 kohm2.072felt
2301 Mohm0.227usually not felt
120none, wet skin120.000fibrillation risk
120none10.909may not let go
120100 kohm1.081felt
1201 Mohm0.119usually not felt
Show the full program
# Chapter 6. p11: Why the resistor is there. Two faults: the outlet's
# earth contact is wrongly wired to the live conductor, or a grounded
# sleeper touches a faulty lamp whose case is live. Either way mains
# voltage drives current through the body (about 1000 ohm hand to
# trunk, illustrative) and the sheet's path (series resistor plus 10
# kohm moist contact, or no contact resistance for wet skin). Zones
# simplified from IEC TS 60479-1: below 0.5 mA usually not felt; to
# 5 mA felt; to 30 mA a hand may not let go; above 30 mA the risk of
# ventricular fibrillation rises with duration.


def zone(ma):
    if ma < 0.5:
        return "usually not felt"
    if ma < 5:
        return "felt"
    if ma < 30:
        return "may not let go"
    return "fibrillation risk"


if __name__ == "__main__":
    print("   mains   resistor         current mA   zone")
    for v in (230.0, 120.0):
        for name, r, rc in (("none, wet skin", 0.0, 0.0),
                            ("none", 0.0, 10e3), ("100 kohm", 100e3, 10e3),
                            ("1 Mohm", 1e6, 10e3)):
            ma = 1000 * v / (r + rc + 1000.0)
            print("   {:5.0f}   {:14s}   {:10.3f}   {}".format(
                v, name, ma, zone(ma)))

Single source and citation

Fan, Y. (2026). Logarithmic-Spiral Planar Inductors, Golden-Angle Phyllotaxis Packing and Human RC Grounding Circuits (Version 1.0.0), Chapter 6: Why the Resistor Is There. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-106 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026106,
  author    = {Fan, Yafu},
  title     = {Logarithmic-Spiral Planar Inductors, Golden-Angle Phyllotaxis Packing and Human RC Grounding Circuits},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book