What does Layered Interfaces and Core Fidelity conclude, in numbers, about “The Reflection Coefficient: a Structural Analogy for Audience Mismatch”?

Answer: In the first four rows the source is 50 ohms. With a 100-ohm load the mismatch delivers 0.889; the turns ratio is 1.414, the quarter-wave section is 70.7 ohms, and after matching the load receives 1.000. With a 200-ohm load the mismatch delivers 0.640, the turns ratio is 2.000 and the quarter-wave section is 100.0 ohms. With an 800-ohm load the mismatch delivers only 0.221; the turns ratio is 4.000 and the quarter-wave section 200.0 ohms. With a 12.5-ohm load the turns ratio is 0.500 and the quarter-wave section 25.0 ohms. In all four cases matching brings delivery to 1.000 without altering a single word of the source.

Scope of the numbers: Marked boxes separate published evidence, runnable Python calculations (23 programs), classical sources and the author's hypotheses.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 0.221, 0.500, 0.640, 0.889, 1.000, 1.414

RL ohm mismatch n=sqrt qw ohm matched swap*fidelity
100.00.889 1.414 70.7 1.000 0.550
200.00.640 2.000 100.0 1.000 0.550
800.00.221 4.000 200.0 1.000 0.550
12.50.640 0.500 25.0 1.000 0.550
RS ohm power into 200-ohm load (V1)
200.00.001250
50.00.003200
10.00.004535
0.00.005000
Show the full program
# Chapter 1. p12: match the load, or replace the source?
# A source of internal resistance RS = 50 ohm drives a resistive load RL.
# Option 1: leave it mismatched. Option 2: insert an ideal transformer
# with turns ratio n = sqrt(RL / RS) (or a quarter-wave section of
# impedance sqrt(RS * RL)); the source is untouched. Option 3: swap the
# source for one whose resistance equals RL. In the analogy option 3 is
# "rewrite the core": the delivered fraction looks perfect, but what is
# delivered is a different signal. The fidelity of the swapped signal
# (0.55) is an illustrative parameter, not a measurement.
import math

RS = 50.0
SWAP_FIDELITY = 0.55


def delivered_fraction(rs, rl):
    # power into RL divided by the source's available power
    return 4.0 * rs * rl / (rs + rl) ** 2


print("RL ohm  mismatch   n=sqrt  qw ohm  matched  swap*fidelity")
for rl in (100.0, 200.0, 800.0, 12.5):
    raw = delivered_fraction(RS, rl)
    n = math.sqrt(rl / RS)
    zq = math.sqrt(RS * rl)
    rl_seen = rl / (n * n)
    matched = delivered_fraction(RS, rl_seen)
    swap = delivered_fraction(rl, rl) * SWAP_FIDELITY
    print("{:6.1f} {:9.3f} {:8.3f} {:7.1f} {:8.3f} {:14.3f}".format(
        rl, raw, n, zq, matched, swap))

# a fixed load with a free source resistance: Jacobi's theorem runs the
# other way; for fixed RL the load power rises as RS falls to zero
V = 1.0
RL = 200.0
print("RS ohm  power into 200-ohm load (V = 1)")
for rs in (200.0, 50.0, 10.0, 0.0):
    p = V * V * RL / (rs + RL) ** 2
    print("{:6.1f}  {:.6f}".format(rs, p))

Single source and citation

Fan, Y. (2026). Impedance Matching for High-Dimensional Systems: Lossless Downward Compatibility without Core Frequency Degradation (Version 1.0.0), Chapter 1: The Reflection Coefficient: a Structural Analogy for Audience Mismatch. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-412 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026412,
  author    = {Fan, Yafu},
  title     = {Impedance Matching for High-Dimensional Systems: Lossless Downward Compatibility without Core Frequency Degradation},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book