What does Alkaline Water and the TDS Myth conclude, in numbers, about “The Stomach as a Constant-Acid Titrator: Secretion, Emptying and Buffer Capacity”?

Answer: Once the stomach is written as a pool with continuous inflow and emptying, ionised water at pH 9.5 and pure water draw the same curve: both fall back below pH 2.5 at about minute 19, some ten seconds apart. Hard tap water keeps the pH above 3 for a total of 29.7 minutes and bicarbonate mineral water for 88.7 minutes, the same order as the buffering of a meal. Buffer capacity explains the difference: 0.002 mmol per litre at pH 6 for ionised water against 27.340 mmol for the mineral water. The verdict on ionised water survives the whole parameter scan; the effect of bicarbonate water depends on the person and the moment.

Scope of the numbers: Its parameters are illustrative; all calculations are generated by its programs. The book is not medical advice and claims no effect of any water or drink on any disease.

中文版

Data table

The numbers below are printed verbatim by the chapter's Python program and can be reproduced by running it. standard-library Python onlyprinted values that match the answer: 2.5, 29.7, 88.7, 9.5

rest state: 50 mL at pH 1.70
500 mL ofpH@1@10@30@60@90min>3back<2.5
pure water pH 72.732.612.372.071.870.019.0
ionized RO pH 9.52.732.622.372.071.870.019.2
hard tap pH 7.66.305.992.982.211.9229.744.0
Wynn water B6.536.516.426.132.8288.794.2
Show the full program
# Chapter 3. p31: The stomach as a constant-acid titrator. A well-mixed
# compartment receives a steady inflow (acid secretion plus swallowed
# saliva) of 0.1 L per hour carrying 2 mmol of acid per hour, and empties
# first-order at 2 per hour (half-time 20.8 min). These illustrative
# rates make the resting state exactly 50 mL at pH 1.7. At t = 0 the
# subject drinks 500 mL of one water. Each step adds inflow, scales the
# contents by exp(-k dt), and solves the closed carbonate charge balance
# for pH by bisection (CO2 kept dissolved, so pH is a lower bound).
# For scale: a meal lifts the median gastric pH to a peak of 6.7
# (Dressman et al. 1990), with buffers that no water bottle carries.
# 胃作为恒酸滴定器:分泌、排空、闭合碳酸盐体系的逐步模拟。
import math

KW = 1.0e-14
K1, K2 = 10 ** -6.35, 10 ** -10.33
Q_IN, ACID = 0.1, 2.0e-3      # L/h inflow, mol/h acid (illustrative)
KE = 2.0                      # 1/h emptying rate (illustrative)
DT = 0.05 / 60.0              # hours per step


def alphas(h):
    den = h * h + K1 * h + K1 * K2
    return h * h / den, K1 * h / den, K1 * K2 / den


def solve_ph(alk, ct):
    lo, hi = -1.0, 14.0
    for _ in range(80):
        mid = 0.5 * (lo + hi)
        h = 10.0 ** -mid
        a0, a1, a2 = alphas(h)
        f = math.fsum([ct * (a1 + 2 * a2), KW / h, -h, -alk])
        if f < 0:
            lo = mid
        else:
            hi = mid
    return 0.5 * (lo + hi)


def water(ph, hco3_mg):
    h = 10.0 ** -ph
    a0, a1, a2 = alphas(h)
    ct = hco3_mg / 61.02e3 / a1
    return math.fsum([ct * (a1 + 2 * a2), KW / h, -h]), ct


def run(ph_w, hco3, vol=0.5, minutes=120):
    v = Q_IN / KE
    alk = -ACID / KE
    ct = 0.0
    aw, cw = water(ph_w, hco3)
    v, alk, ct = v + vol, alk + aw * vol, ct + cw * vol
    decay = math.exp(-KE * DT)
    marks, above3, back = {}, 0.0, None
    steps = int(round(minutes / 60.0 / DT))
    for i in range(1, steps + 1):
        v = (v + Q_IN * DT) * decay
        alk = (alk - ACID * DT) * decay
        ct = ct * decay
        ph = solve_ph(alk / v, ct / v)
        t = i * DT * 60.0
        if ph > 3.0:
            above3 += DT * 60.0
        if back is None and ph < 2.5:
            back = t
        for m in (1, 10, 30, 60, 90):
            if abs(t - m) < 1e-6:
                marks[m] = ph
    return marks, above3, back


print("rest state: {:.0f} mL at pH {:.2f}".format(
    Q_IN / KE * 1000, solve_ph(-ACID / Q_IN, 0.0)))
print("500 mL of        pH@1   @10   @30   @60   @90  min>3  back<2.5")
for name, ph, hc in [("pure water pH 7", 7.0, 0.0),
                     ("ionized RO pH 9.5", 9.5, 0.0),
                     ("hard tap pH 7.6", 7.6, 250.0),
                     ("Wynn water B", 6.6, 2172.0)]:
    mk, a3, bk = run(ph, hc)
    print("{:17s} {}  {:5.1f}  {:6.1f}".format(
        name, " ".join("{:5.2f}".format(mk[m]) for m in (1, 10, 30, 60,
                                                          90)), a3, bk))

Single source and citation

Fan, Y. (2026). Alkaline Water against Gastric Acid, the TDS Myth and Electrolyte Dosing in Drinking Water (Version 1.0.0), Chapter 3: The Stomach as a Constant-Acid Titrator: Secretion, Emptying and Buffer Capacity. 5D Library. DOI pending

DOI pending · monograph page goes live after publication · 5DL-B-192 · v1.0.0 · CC-BY-NC-ND-4.0

BibTeX
@book{fan2026192,
  author    = {Fan, Yafu},
  title     = {Alkaline Water against Gastric Acid, the TDS Myth and Electrolyte Dosing in Drinking Water},
  year      = {2026},
  publisher = {5D Library},
  edition   = {1.0.0},
  note      = {DOI pending}
}

Other chapter answers in this book