5D Library › 内感受解离、突显网络切换与内脏自主神经修复 · English

第五章 血流能变多少:四次方律与自动调节

上一章说明,关于盆腔的结论不能从心脏的测量得出。本章退一步问一个更基本的问题:假设交感的血管收缩驱动真的撤除了,血流能变多少?这是流体力学与血管生理学的问题,与注意力无关,而答案给出了原说法第五、六环节的上界。

四次方律

证据

哈根—泊肃叶定律。 对长度 LL、半径 rr 的刚性圆管中黏度 μ\mu 的牛顿流体的层流,流量为 Q=πr4ΔP/(8μL)Q = \pi r^4 \Delta P / (8\mu L),即传导度与半径的四次方成正比。标准心血管生理学教材给出这一关系及其在循环中的适用限度(血液是非牛顿流体、血管是弹性的、分叉处非层流等)(Levick 2010)。

四次方律有两个方向的后果,而讨论中通常只记住一个方向。

推导

# Chapter 5. What a change in vascular smooth-muscle tone can and cannot do to
# flow. Hagen-Poiseuille for a single tube: Q = pi r^4 dP / (8 mu L), so
# conductance scales as r^4 and a 19 % dilation doubles flow at fixed
# pressure. But organs are not single tubes at fixed pressure: they sit in
# parallel beds fed by a shared pressure, so dilating one bed raises total
# conductance, LOWERS perfusion pressure if cardiac output is fixed, and
# steals flow from the others. The program does both calculations and shows
# how different the answers are. Physiology-free algebra; illustrative
# numbers, not measurements.
import math

def q_single(ratio):
    """Flow relative to baseline for a radius ratio, fixed driving
    pressure."""

    return ratio ** 4

def radius_for_flow(fold):
    return fold ** 0.25

# parallel beds: conductances G_i (arbitrary units), one shared pump
BEDS = [("pelvic / visceral", 1.0), ("skeletal muscle", 3.0),
        ("splanchnic", 2.5), ("skin", 1.0), ("the rest", 4.0)]

def parallel(dilate_factor, fixed="output", co=1.0, map_mmHg=90.0):
    """dilate_factor multiplies the conductance of bed 0 only.
    fixed='output' holds cardiac output constant (pressure falls);
    fixed='pressure' holds mean pressure constant (output rises)."""
    g = [
        v * (dilate_factor if i == 0 else 1.0)
        for i, (_, v) in enumerate(BEDS)
    ]
    gt = math.fsum(g)
    if fixed == "pressure":
        p = map_mmHg
        flows = [p * x for x in g]
    else:
        p = co * map_mmHg * math.fsum(v for _, v in BEDS) / gt
        flows = [p * x for x in g]
    return p, flows, gt

if __name__ == "__main__":
    print("A. one tube, fixed driving pressure: Q proportional to r^4")
    print("   radius change   flow ratio")
    for d in (-0.20, -0.10, -0.05, 0.0, 0.05, 0.10, 0.19, 0.30):
        print("   {:+12.0%} {:13.3f}".format(d, q_single(1 + d)))
    print("   a doubling of flow needs r x {:.4f}, i.e. {:+.1%}"
          .format(radius_for_flow(2.0), radius_for_flow(2.0) - 1))
    print("   a 10 % flow rise needs r x {:.4f}, i.e. {:+.2%}"
          .format(radius_for_flow(1.10), radius_for_flow(1.10) - 1))

    print(
        "\nB. five parallel beds, conductance of the first bed multiplied"
        " by k"
    )
    base_p, base_f, base_g = parallel(1.0)
    for fixed, label in (("pressure", "mean pressure held constant"),
                         ("output", "cardiac output held constant")):
        print("\n   {}:".format(label))
        print("      k     pressure   bed-1 flow   other beds   bed-1 share")
        for k in (1.0, 1.5, 2.0, 3.0, 5.0):
            p, f, gt = parallel(k, fixed=fixed)
            others = math.fsum(f[1:])
            print(
                "      {:4.1f} {:10.1f} {:12.3f} {:12.3f} {:12.1%}".format(
                    k,
                    p,
                    f[0] / base_f[0],
                    others / math.fsum(base_f[1:]),
                    f[0] / math.fsum(f),
                )
            )

    print(
        "\nWith pressure held constant, doubling the conductance of one"
        " small bed"
    )
    print(
        "doubles its flow and leaves the others alone, but total output must"
        " rise."
    )
    print(
        "With output held constant, the same dilation raises that bed's flow"
        " by much"
    )
    print(
        "less and takes flow from every other bed. Which calculation applies"
        " depends"
    )
    print(
        "on what the circulation actually does, and neither is settled by"
        " asserting"
    )
    print("that 'sympathetic tone was released'. Chapter 5 returns to this.")

    print(
        "\nC. how large a conductance change could a measurement even detect?"
    )
    print(
        "   If bed-1 flow is measured with a 12 % coefficient of"
        " variation, the"
    )
    print(
        "   smallest fold change detectable at 80 % power with n = 20 paired"
    )
    print("   observations is about:")
    cv, n = 0.12, 20
    # paired t test on log flow: detectable log difference = (1.96 + 0.84) *
    # cv*sqrt(2)/sqrt(n)
    d = (1.96 + 0.8416) * cv * math.sqrt(2) / math.sqrt(n)
    print("      {:+.1%} in flow, i.e. {:+.2%} in radius"
          .format(math.exp(d) - 1, math.exp(d) ** 0.25 - 1))
# A. one tube, fixed driving pressure: Q proportional to r^4
#    radius change   flow ratio
#            -20%         0.410
#            -10%         0.656
#             -5%         0.815
#             +0%         1.000
#             +5%         1.216
#            +10%         1.464
#            +19%         2.005
#            +30%         2.856
#    a doubling of flow needs r x 1.1892, i.e. +18.9%
#    a 10 % flow rise needs r x 1.0241, i.e. +2.41%
#
# B. five parallel beds, conductance of the first bed multiplied by k
#
#    mean pressure held constant:
#       k     pressure   bed-1 flow   other beds   bed-1 share
#        1.0       90.0        1.000        1.000         8.7%
#        1.5       90.0        1.500        1.000        12.5%
#        2.0       90.0        2.000        1.000        16.0%
#        3.0       90.0        3.000        1.000        22.2%
#        5.0       90.0        5.000        1.000        32.3%
#
#    cardiac output held constant:
#       k     pressure   bed-1 flow   other beds   bed-1 share
#        1.0       90.0        1.000        1.000         8.7%
#        1.5       86.2        1.438        0.958        12.5%
#        2.0       82.8        1.840        0.920        16.0%
#        3.0       76.7        2.556        0.852        22.2%
#        5.0       66.8        3.710        0.742        32.3%
#
# With pressure held constant, doubling the conductance of one small bed
# doubles its flow and leaves the others alone, but total output must rise.
# With output held constant, the same dilation raises that bed's flow by much
# less and takes flow from every other bed. Which calculation applies depends
# on what the circulation actually does, and neither is settled by asserting
# that 'sympathetic tone was released'. Chapter 5 returns to this.
#
# C. how large a conductance change could a measurement even detect?
#    If bed-1 flow is measured with a 12 % coefficient of variation, the
#    smallest fold change detectable at 80 % power with n = 20 paired
#    observations is about:
#       +11.2% in flow, i.e. +2.69% in radius

A 段:半径增加 19% 使流量翻倍;而只要 10% 的流量上升就需要半径增加 2.41%。前者常被引用来说明「微小的血管变化带来巨大的血流变化」;后者是同一件事的另一面,也是测量上的难题——第 C 段给出:若床区血流的测量变异系数为 12%、配对观测 20 对,80% 把握度下可检测的最小变化是流量 +11.2%,对应半径 +2.69%。换句话说,可检测的半径变化是很小的,所以「测不到变化」不等于「半径没变」,而「测到了巨大的流量变化」也应先怀疑测量。

B 段是更重要的修正。器官不是单管,也不在固定压力下工作:若干床区并联,共享一个泵。把第一个床区(本例设为内脏/盆腔,传导度占总量约 8.7%)的传导度乘以 kk:

  • 平均压力固定时,该床区流量按 kk 成比例上升(k=2k=2 时 2.000 倍),其他床区不变,但总输出量必须上升;
  • 心输出量固定时,同样的扩张只使该床区流量上升到 1.840 倍,压力从 90 降到 82.8 毫米汞柱,而其他床区的流量降到 0.920 倍——被夺走了。

哪一种计算适用,取决于循环实际上做了什么,而这不是由「交感撤除了」这句话决定的。在一个安静躺着的人身上,心输出量不会为了盆腔的扩张而大幅上升,所以现实更接近第二种情形:局部的扩张以其他部位的血流为代价。Joyner 与 Casey 对运动时血流调节的综述把这一点写成「相互竞争的生理需求的层级」(Joyner and Casey 2015)。

自动调节把反应吃掉一部分

还有第二重约束。器官血流不是被动地跟随传导度,而是被局部的调节机制稳定在一定范围内。

证据

肌源性自动调节(综述)。 血管平滑肌对牵张(跨壁压)的反应是收缩,这是肌源性反应;它使器官血流在相当宽的灌注压范围内保持相对稳定。Johnson 对自动调节作了经典综述 (Johnson 1986),Davis 与 Hill 综述了肌源性反应的信号机制 (Davis and Hill 1999)。Segal 综述了微循环层面的血流调节,包括上行性扩张与血管间的电耦合 (Segal 2005)。

把自动调节写成一阶的张力调节:张力向一个随血管收缩驱动 uu 与壁应力(这里以血流为指标)升高的设定点松弛。

推导

# Chapter 5. Myogenic autoregulation damps whatever the autonomic nervous
# system does. Vessel tone T relaxes toward a set point raised by
# vasoconstrictor drive u and by wall stress (here indexed by flow, which is
# how autoregulation responds to overperfusion):
#   dT/dt = (T_inf - T) / tau,   T_inf = T0 + ku * u + gain * (Q / Qref - 1)
#   G = Gmax / (1 + T),          Q = G * P      (P = perfusion pressure, held
#   fixed)
# A step release of constrictor drive (u: 1 -> 0) is integrated with RK4 (dt =
# 0.05 s). The autoregulatory term needs time to build, so flow approaches its
# new level MONOTONICALLY, with no overshoot (a first-order regulator whose
# stress term builds on the same time scale as the tone it corrects cannot
# produce a transient peak): the program reports the settled rise and the
# fraction the regulator gives back. Author's model; illustrative parameters,
# not measurements.
import math

GMAX, T0, KU, P = 1.0, 0.6, 0.9, 90.0
TAU, DT, T_END = 18.0, 0.05, 600.0

def conductance(T):
    return GMAX / (1.0 + T)

def steady_tone(u, gain, Qref, iters=400):
    """Solve T = T0 + ku u + gain (G(T) P / Qref - 1) by fixed-point
    iteration."""

    T = T0 + KU * u
    for _ in range(iters):
        T = 0.5 * T + 0.5 * (
            T0 + KU * u + gain * (conductance(T) * P / Qref - 1.0)
        )
    return T

def run(gain):
    # baseline: constrictor drive on, autoregulation at its own set point
    # reference flow for the stress term
    Qref = conductance(T0 + KU * 1.0) * P
    T = steady_tone(1.0, gain, Qref)
    q0 = conductance(T) * P
    f = (
        lambda T, u: (
            T0 + KU * u + gain * (conductance(T) * P / Qref - 1.0) - T
        )
        / TAU
    )
    peak = q0
    for i in range(int(T_END / DT)):
        k1 = f(T, 0.0)
        k2 = f(T + DT / 2 * k1, 0.0)
        k3 = f(T + DT / 2 * k2, 0.0)
        k4 = f(T + DT * k3, 0.0)
        T += DT / 6 * (k1 + 2 * k2 + 2 * k3 + k4)
        peak = max(peak, conductance(T) * P)
    return q0, peak, conductance(T) * P

if __name__ == "__main__":
    print("Step release of vasoconstrictor drive, u: 1.0 -> 0.0,")
    print("pressure fixed at {:.0f} mmHg".format(P))
    print(
        "\n   gain   baseline Q   settled Q   settled rise   damping vs"
        " gain 0"
    )
    results = {}
    for gain in (0.0, 0.3, 0.6, 1.0, 2.0):
        q0, pk, ss = run(gain)
        rise = ss / q0 - 1
        results[gain] = rise
        damp = (
            1 - rise / results[0.0] if results[0.0] > 1e-12 else float("nan")
        )
        print("   {:5.2f} {:12.3f} {:12.3f} {:14.1%} {:19.1%}"
              .format(gain, q0, ss, rise, damp))

    print(
        "\nWith no autoregulation the full release of constrictor drive"
        " raises flow"
    )
    print(
        "by {:.0%}. Flow-sensing gain 0.6 cuts that to {:.0%} and gain 2.0 to"
        " {:.0%},".format(results[0.0], results[0.6], results[2.0])
    )
    print(
        "so between {:.0%} and {:.0%} of the response is absorbed by the"
        " regulator.".format(
            1 - results[0.6] / results[0.0], 1 - results[2.0] / results[0.0]
        )
    )
    print(
        "\nNote what the model does NOT do: the approach is monotonic,"
        " with no"
    )
    print(
        "overshoot. A first-order regulator whose stress term builds on the"
        " same time"
    )
    print(
        "scale as the tone it corrects cannot produce a transient peak;"
        " getting one"
    )
    print(
        "requires a faster sensor than effector, which this model does not"
        " claim and"
    )
    print("which is not established for the beds at issue.")
    print(
        "\nTwo consequences for Chapter 6. First, a model that predicts a"
        " large"
    )
    print(
        "SUSTAINED regional flow rise from autonomic withdrawal alone has to"
        " say why"
    )
    print(
        "autoregulation does not absorb most of it, and the gain is not known"
        " here."
    )
    print(
        "Second, because the approach has a time constant of tens of seconds,"
        " WHEN"
    )
    print(
        "flow is measured largely determines the answer: the table below"
        " shows the"
    )
    print(
        "same manoeuvre reading as a 9 % rise at 5 s and a 37 % rise at 60 s."
    )

    print("\nTime course at gain 0.6, flow relative to baseline:")
    gain = 0.6
    Qref = conductance(T0 + KU * 1.0) * P
    T = steady_tone(1.0, gain, Qref)
    q0 = conductance(T) * P
    f = (
        lambda T, u: (
            T0 + KU * u + gain * (conductance(T) * P / Qref - 1.0) - T
        )
        / TAU
    )
    marks = [0.0, 5.0, 15.0, 30.0, 60.0, 120.0, 300.0, 600.0]
    row = []
    for i in range(int(T_END / DT) + 1):
        t = i * DT
        if marks and abs(t - marks[0]) < DT / 2:
            row.append((marks.pop(0), conductance(T) * P / q0))
        k1 = f(T, 0.0)
        k2 = f(T + DT / 2 * k1, 0.0)
        k3 = f(T + DT / 2 * k2, 0.0)
        k4 = f(T + DT * k3, 0.0)
        T += DT / 6 * (k1 + 2 * k2 + 2 * k3 + k4)
    print("   t (s)    " + "".join("{:8.0f}".format(t) for t, _ in row))
    print("   Q / Q0   " + "".join("{:8.3f}".format(v) for _, v in row))
# Step release of vasoconstrictor drive, u: 1.0 -> 0.0,
# pressure fixed at 90 mmHg
#
#    gain   baseline Q   settled Q   settled rise   damping vs gain 0
#     0.00       36.000       56.250          56.2%                0.0%
#     0.30       36.000       51.938          44.3%               21.3%
#     0.60       36.000       49.373          37.1%               34.0%
#     1.00       36.000       47.137          30.9%               45.0%
#     2.00       36.000       44.010          22.2%               60.4%
#
# With no autoregulation the full release of constrictor drive raises flow
# by 56%. Flow-sensing gain 0.6 cuts that to 37% and gain 2.0 to 22%,
# so between 34% and 60% of the response is absorbed by the regulator.
#
# Note what the model does NOT do: the approach is monotonic, with no
# overshoot. A first-order regulator whose stress term builds on the same time
# scale as the tone it corrects cannot produce a transient peak; getting one
# requires a faster sensor than effector, which this model does not claim and
# which is not established for the beds at issue.
#
# Two consequences for Chapter 6. First, a model that predicts a large
# SUSTAINED regional flow rise from autonomic withdrawal alone has to say why
# autoregulation does not absorb most of it, and the gain is not known here.
# Second, because the approach has a time constant of tens of seconds, WHEN
# flow is measured largely determines the answer: the table below shows the
# same manoeuvre reading as a 9 % rise at 5 s and a 37 % rise at 60 s.
#
# Time course at gain 0.6, flow relative to baseline:
#    t (s)           0       5      15      30      60     120     300     600
#    Q / Q0      1.000   1.092   1.226   1.323   1.367   1.371   1.371   1.371

结果是:在没有自动调节时,完全撤除血管收缩驱动使流量上升 56.2%;流量敏感的自动调节增益 0.6 时降到 37.1%、增益 2.0 时降到 22.2%,也就是吸收了 34% 到 60% 的稳态反应。

左:撤除血管收缩驱动后流量相对基线的时间进程,自动调节增益 0(实线)、0.6(虚线)、2.0(点线);趋近是单调的,没有过冲。右:稳态流量上升幅度随自动调节增益的变化。

程序同时记下了一个否定的结果:在这个一阶模型里,趋近是单调的,没有过冲。一个传感器与执行器时间常数相同的一阶调节器不可能产生瞬时的峰值;要得到过冲,需要传感比执行更快,而这个模型没有这样假设,对所讨论的床区也没有建立的证据。本书因此不声称存在「练习后的血流瞬时高峰」。

但时间常数本身有后果:同一次操作在 5 秒时读作 +9%,在 60 秒时读作 +37%。测量时点在很大程度上决定答案,而这是任何声称测到了血流变化的研究必须预先规定的。

注

测量方法的限度。 皮肤与浅层组织的微循环常用激光多普勒血流仪测量,Rajan 等人综述了其方法学发展与限度,包括测量深度、组织异质性与基线漂移 (Rajan et al. 2009)。盆腔深部器官的血流不能用这类方法测量;可用的手段(超声多普勒、对比增强超声、磁共振灌注)各有自己的变异来源。本书不推荐任何具体方案,只指出第八章把血流类指标完全排除在主要结局之外,正是因为可用的测量在变异性与可及性上都不支持它作为主要结局。

「微循环修复」这个说法

原说法的最后一个环节是「内脏/盆腔微循环的自主修复」。这里有一个需要分清的区别,与第 5 本中「标志物」与「过程本身」的区别是同一类。

血流的变化与组织的修复不是一回事。前者是分钟尺度的血流动力学量,后者涉及细胞、基质与时间尺度以天计的过程。即使血流真的上升了 37% 并维持住,由此推出「修复」还需要一整串额外的前提:该组织的功能确实受限于灌注、灌注的提高足以解除该限制、而且该限制是可逆的。这些前提中的任何一条,本书都没有证据可引。

假说 · 尚未验证

作者的假说(尚未确立): 在安静仰卧、呼吸方式受控的条件下,一段以不解释身体感觉为目标的注意练习,不会使可测的外周微循环指标产生超过测量变异的持续变化;若有变化,其大小与同等时长的安静休息相当。什么样的结果能证明它是错的: 在事先登记的交叉设计中,以固定时点(例如第 10 分钟与第 30 分钟)的外周灌注指标为预先指定结局,若练习条件相对于时长、姿势与呼吸引导完全匹配的休息条件的差别的 95% 置信区间不包含零,并在独立样本中重现,则本假说错。

注意这个假说的方向:它预测的是没有差别。这样写是有意的。按本书前四章的结果,原说法所依赖的链条在第一环方向相反、第三环不增加信息、第四环解剖上不成立,而第五、六环受四次方律与自动调节的约束,所以「没有可测的持续差别」是这一框架下最自然的预期。把它写成可证伪的形式,比写成一个含糊的乐观预期更有用;而且按第 33 本的立场,无论结果正负都发表。

还有一条本书没有讨论的通路

为了不留下漏洞,这里记下一条本书没有排除的可能。盆腔与内脏的血流受多种非神经因素影响:局部代谢产物、内皮来源的因子、肌肉张力与姿势、腹内压、以及(对盆腔而言)盆底肌的张力状态。一段安静的、姿势稳定的练习完全可能通过降低盆底与腹壁肌肉的张力影响局部血流,而这与「交感撤除」和「迷走张力」都无关,是一条力学通路。本书没有讨论它,因为它不是原说法的内容;但它是一个可检验的替代解释,而且在设计第八章的试验时,它意味着姿势与肌肉张力必须在两臂间匹配,否则会成为混淆。

本章小结

即使假设血管收缩驱动真的撤除了,血流的变化也受两重约束。四次方律:流量翻倍需半径增加 18.9%,10% 的流量上升需 2.41%,而配对测量在 12% 变异系数、20 对下只能检出 +11.2% 的流量变化。并联床区:压力固定时局部扩张要求总输出上升,心输出量固定时同样的扩张只使该床区上升到 1.840 倍并把其他床区压到 0.920 倍。自动调节:流量敏感的调节在本书模型中吸收了稳态反应的 34% 到 60%,趋近是单调的、没有过冲,而时间常数使同一操作在 5 秒时读作 +9%、在 60 秒时读作 +37%,所以测量时点必须预先规定。最后,「血流变化」与「组织修复」是两件事,后者需要一整串本书无法引证的额外前提;而一条力学通路(盆底与腹壁张力)是本书未排除的替代解释,并因此成为第八章必须匹配的因素。

参考文献

Davis, Michael J., and Michael A. Hill. 1999. “Signaling Mechanisms Underlying the Vascular Myogenic Response.” Physiological Reviews 79 (2): 387–423. https://doi.org/10.1152/physrev.1999.79.2.387.
Johnson, Paul C. 1986. “Autoregulation of Blood Flow.” Circulation Research 59 (5): 483–95. https://doi.org/10.1161/01.RES.59.5.483.
Joyner, Michael J., and Darren P. Casey. 2015. “Regulation of Increased Blood Flow (Hyperemia) to Muscles During Exercise: A Hierarchy of Competing Physiological Needs.” Physiological Reviews 95 (2): 549–601. https://doi.org/10.1152/physrev.00035.2013.
Levick, J. Rodney. 2010. An Introduction to Cardiovascular Physiology. 5th ed. London: Hodder Arnold.
Rajan, Vinayakrishnan, Babu Varghese, Ton G. van Leeuwen, and Wiendelt Steenbergen. 2009. “Review of Methodological Developments in Laser Doppler Flowmetry.” Lasers in Medical Science 24: 269–83. https://doi.org/10.1007/s10103-007-0524-0.
Segal, Steven S. 2005. “Regulation of Blood Flow in the Microcirculation.” Microcirculation 12 (1): 33–45. https://doi.org/10.1080/10739680590895028.

Fan, Y. (2026). Interoceptive Decoupling, Salience-Network Switching and Autonomic Visceral Restoration: From Precision-Weighting in the Default Mode Network and the Redistribution of Vagal Tone to the Neurophenomenology of a Non-Judgmental Imagery Stream, with a Textual Examination of neiguan in the Huangdi Neijing [内感受解离、突显网络切换与内脏自主神经修复] (Version 1.0.0). 5D Library. https://doi.org/10.5281/zenodo.24020418 · Licensed under Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).