5D Library › Scaling Laws, Allometric Growth and the Statistical Physics of Organisational Metabolism · 中文
Chapter 3 Urban Scaling: Superlinearity, Finite-Time Singularities and Accelerating Innovation
A city is not an enlarged animal
Companies often fail, but cities seldom disappear. In 2007 Bettencourt, Lobo, Helbing, Kühnert and West carried the question of Chapter 1 over to cities: do urban indicators also change with population according to power laws, and if so, are the exponents greater or smaller than 1 (Bettencourt et al. 2007)?
Evidence
Three classes of urban exponent. Using data for cities in the United States, the European Union, Germany and China, Bettencourt and colleagues fitted to each indicator. The results fall roughly into three classes: quantities tied to individual needs (housing, employment, household electricity and water use) have ; infrastructure is sublinear, for example petrol stations 0.77, petrol sales 0.79, length of electrical cables 0.87 and road surface 0.83; socioeconomic quantities are superlinear, for example new patents 1.27, inventors 1.25, private research and development employment 1.34, total wages 1.12, gross domestic product 1.13 to 1.26 and serious crimes 1.16 (Bettencourt et al. 2007). Bettencourt (2013) derived from a network model of interactions among people in a city, with under a set of simplifying conditions, that is, about 1.17 and 0.83 (Bettencourt 2013).
The framework’s “infrastructure about 0.85, socioeconomic output about 1.15” is a rounded summary of these numbers. Unlike organisms, cities have socioeconomic exponents above 1: the larger the city, the greater the output per person and the faster the pace.
Calculation
The first part computes how totals and per-person quantities change when the population doubles. The second part builds a synthetic urban system: 400 metropolitan areas whose core cities follow an approximately Zipf distribution; output is recorded in the core city where people work, population is counted where they live, and the larger the core, the larger the share of commuters coming in from outside its administrative boundary (illustrative parameters: the ratio of commuter-belt residents to core residents rises from 0.10 to about 0.67). The true exponent at the metropolitan level is set to 1.00 or 1.12, and the data are then fitted against metropolitan population and against core-city population. The last line makes the commuter share independent of city size, as a control.
# Urban scaling Y = Y0 N^beta. Part 1: what a doubling of population does. Part 2: a
# SYNTHETIC urban system showing how the city boundary changes the fitted exponent: output
# is produced where people WORK, population is counted where they LIVE, and larger cores
# draw proportionally more commuters from outside their administrative boundary. All
# parameters are illustrative (not estimates for any country).
import math, random
from statistics import mean
def ols(xs, ys):
mx, my = mean(xs), mean(ys)
return (sum((x - mx) * (y - my) for x, y in zip(xs, ys))
/ sum((x - mx) ** 2 for x in xs))
if __name__ == "__main__":
print("beta doubling N multiplies Y by per-capita change")
for b in (0.85, 1.00, 1.15):
print(f"{b:.2f} {2 ** b:.2f} {2 ** (b - 1) - 1:+.1%}")
rng = random.Random(2007)
cores = [20000 / rng.random() for _ in range(3000)] # Zipf-like core sizes
cores = [c for c in cores if c < 5e6][:400]
print(f"{len(cores)} metros, cores {min(cores):,.0f} to {max(cores):,.0f} residents")
print("true beta (metro) fit on metro residents fit on core residents only")
for beta in (1.00, 1.12):
xm, xc, ys = [], [], []
for c in cores:
s = 0.10 + 0.25 * math.log10(c / 2e4) # commuter belt / core
metro = c * (1 + s)
y = metro ** beta * math.exp(rng.gauss(0, 0.15)) # output recorded in core
xm.append(math.log(metro)); xc.append(math.log(c)); ys.append(math.log(y))
print(f" {beta:.2f} {ols(xm, ys):.3f}"
f" {ols(xc, ys):.3f}")
xc, ys = [], [] # same, but belt share NOT linked to core size
for c in cores:
s = rng.uniform(0.10, 0.70)
xc.append(math.log(c)); ys.append(math.log((c * (1 + s)) ** 1.12)
+ rng.gauss(0, 0.15))
print(f"core-only fit when the belt share does not grow with size (true 1.12):"
f" {ols(xc, ys):.3f}")
# beta doubling N multiplies Y by per-capita change
# 0.85 1.80 -9.9%
# 1.00 2.00 +0.0%
# 1.15 2.22 +11.0%
# 400 metros, cores 20,195 to 3,947,016 residents
# true beta (metro) fit on metro residents fit on core residents only
# 1.00 1.006 1.091
# 1.12 1.129 1.225
# core-only fit when the belt share does not grow with size (true 1.12): 1.125When the population doubles, a quantity with exponent 0.85 becomes 1.80 times larger and one with exponent 1.15 becomes 2.22 times larger, in line with the framework. Per person, however, this is only −9.9 % and +11.0 %. Popular accounts often say that “doubling a city’s population raises wages per person by 15 % and saves 15 % of infrastructure per person”; this takes the 0.15 in the exponent directly as a percentage, and the accurate figures are about 11 % and 10 %.
The second part shows the role of city boundaries. If the true relation is linear (1.00), fitting against metropolitan population gives 1.006, but fitting against core-city population gives 1.091; if the true exponent is 1.12, the two definitions give 1.129 and 1.225. The bias arises because the output of large cities includes a growing contribution from commuters who are not counted in the core city’s population. If the commuter share does not depend on city size, the core-city definition gives 1.125 and the bias disappears. The model is illustrative, but it points to a real problem: part of the superlinearity may come from how the boundary is drawn rather than from the city itself.
Evidence
Criticisms of urban scaling. Arcaute and colleagues (2015) used thresholds of commuting and population density to construct many different systems of cities for England and Wales, and found that most indicators were approximately linear under all definitions and that, where nonlinearity appeared, the exponent varied widely with the definition of the boundary; they concluded that population size alone is not enough to describe or predict the state of a city (Arcaute et al. 2015). Leitão, Miotto, Gerlach and Altmann (2016) compared five statistical models of fluctuations on 15 data sets from five databases and found that the conclusion “the exponent differs from 1” depends on how fluctuations are modelled and on the heavy-tailed distribution of city sizes: for cinema attendance in the European Union, for example, one model gives an exponent of 1.46 and another 1.00; their tests produced linear, superlinear, sublinear and undecidable cases, and they argued that the exponent and the fluctuation model should be estimated together (Leitão et al. 2016). Bettencourt and colleagues (2010), for their part, showed that each city’s deviation from the scaling law (a size-adjusted indicator) carries information of its own and can persist for decades (Bettencourt et al. 2010).
The growth equation and the finite-time singularity
Evidence
The growth equation of Bettencourt and colleagues. They assumed that a city’s resource supply is used to maintain the existing population ( per person) and to support additional population ( per person), giving . With , the population follows an S-shaped curve to a ceiling, as in the biological growth of Chapter 2; with , it tends to infinity in a finite time , a finite-time singularity. They noted that with finite resources this means growth stalls or even collapses before the singularity unless major innovations “reset” the parameters and start a new cycle, and that to sustain growth such innovations must arrive at an accelerating rate, the intervals between cycles shrinking as the population grows (Bettencourt et al. 2007).
Calculation
Write and . For , rewriting the equation as a linear equation in gives The program takes the illustrative values , (per year) and , and compares the formula with numerical integration; it then divides growth into a series of “cycles”: in cycle resources cap the population at , and when the cap is reached an innovation doubles it. The program gives the number of years each doubling takes.
# Growth equation of Bettencourt et al. 2007: dN/dt = a N^beta - b N (N in units of the
# starting population; a, b per year; ILLUSTRATIVE values a = 0.03, b = 0.01, N0 = 1).
# beta < 1: growth stops at N = (a/b)^(1/(1-beta)). beta > 1: N reaches infinity at the
# finite time t_c = ln(1 / (1 - (b/a) N0^(1-beta))) / ((beta - 1) b). Part 2: a MODEL of
# "innovation cycles": in cycle j resources cap N at 2^j; an innovation doubles the cap.
import math
A, B, N0 = 0.03, 0.01, 1.0
def integrate(beta, t_end, n_stop=1e9, dt=0.001):
n, t = N0, 0.0
while t < t_end and n < n_stop:
n += dt * (A * n ** beta - B * n); t += dt
return t, n
def t_c(beta, n0=N0):
return math.log(1 / (1 - (B / A) * n0 ** (1 - beta))) / ((beta - 1) * B)
def cycle_time(beta, lo, hi, steps=4000):
"""Time to grow from lo to hi: integral of dN / (a N^beta - b N), midpoint rule."""
h = (hi - lo) / steps
return sum(h / (A * (lo + (i + .5) * h) ** beta - B * (lo + (i + .5) * h))
for i in range(steps))
if __name__ == "__main__":
print(f"beta = 0.85: ceiling (a/b)^(1/0.15) = {(A / B) ** (1 / 0.15):.0f};"
f" N after 2,000 years = {integrate(0.85, 2000)[1]:.0f}")
t9, t15 = integrate(1.15, 1e4)[0], integrate(1.15, 1e4, 1e15)[0]
print(f"beta = 1.15: formula t_c = {t_c(1.15):.1f} years; numerical N passes"
f" 1e9 at {t9:.1f}, 1e15 at {t15:.1f}")
print("cycle N from -> to duration (years) ratio to previous clock at end")
clock, prev = 0.0, None
for j in range(1, 13):
d = cycle_time(1.15, 2 ** (j - 1), 2 ** j); clock += d
r = f"{d / prev:.3f}" if prev else " - "
if j <= 6 or j % 3 == 0:
print(f"{j:4d} {2 ** (j - 1):5d} -> {2 ** j:5d} {d:7.1f}"
f" {r} {clock:7.1f}")
prev = d
q = 2 ** -0.15
print(f"long-run ratio 2^-0.15 = {q:.3f}; all later cycles together"
f" < {prev * q / (1 - q):.0f} years")
# beta = 0.85: ceiling (a/b)^(1/0.15) = 1516; N after 2,000 years = 1211
# beta = 1.15: formula t_c = 270.3 years; numerical N passes 1e9 at 260.3, 1e15 at 269.1
# cycle N from -> to duration (years) ratio to previous clock at end
# 1 1 -> 2 32.1 - 32.1
# 2 2 -> 4 27.7 0.862 59.8
# 3 4 -> 8 24.0 0.867 83.8
# 4 8 -> 16 20.9 0.871 104.7
# 5 16 -> 32 18.3 0.875 123.0
# 6 32 -> 64 16.1 0.878 139.1
# 9 256 -> 512 11.1 0.885 176.9
# 12 2048 -> 4096 7.8 0.890 203.2
# long-run ratio 2^-0.15 = 0.901; all later cycles together < 71 yearsWith the population tends to a ceiling of 1,516 and after 2,000 years stands at 1,211, still creeping upwards. With the formula gives years; in the numerical integration the population passes at 260.3 years and at 269.1 years, consistent with the formula: the closer to the singularity, the faster the growth. The doubling time falls from 32.1 years for the first doubling to 16.1 for the sixth and 7.8 for the twelfth, and the ratio between successive doublings rises from 0.862 towards its limit . This is a convergent geometric series: all doublings after the twelfth together take less than 71 years. In other words, “an innovation every time resources run out” does not remove the singularity; it merely cuts the same trajectory into ever shorter pieces. For growth to continue indefinitely, each innovation must come sooner than the last.
Note
The singularity is a consequence of the model, not an observation. No city’s population has gone to infinity in finite time. The finite-time singularity says that if the superlinear supply equation held for long, growth would approach an impossible end point ever faster, so the equation itself must fail somewhere. Bettencourt and colleagues read this as “innovation cycles must accelerate”; that reading is compatible with qualitative accounts of urban history, but no quantitative test has shown that innovation cycles are accelerating at any particular rate. Volume 28 discussed early-warning signals before critical transitions; this chapter describes only the mathematical structure of the superlinear growth equation and makes no forecast for any city.
Hypothesis · not established
The interaction-density hypothesis (not yet established). Bettencourt’s 2013 model attributes superlinearity to networks of face-to-face interaction among people (Bettencourt 2013). The author conjectures that if this mechanism holds, the superlinear exponents of wages, patents and similar indicators will fall in urban systems where the share of remote work rises sharply. The testable prediction is that, with the same metropolitan boundaries, the exponents after the spread of remote work are closer to 1 than before. If, in a pre-registered analysis, the 95 % confidence interval of the difference between the two periods’ exponents contains no negative values, the hypothesis is refuted.
Summary
Urban infrastructure grows sublinearly with population and socioeconomic output superlinearly; doubling the population multiplies the totals by 1.80 and 2.22, or about −10 % and +11 % per person. The exponents are sensitive to the definition of city boundaries and to the fluctuation model, and the synthetic model shows that commuting can “turn” a linear relation into a superlinear one of 1.09. The superlinear growth equation diverges in finite time and each doubling takes about 10 % less time than the last, so that “resetting by innovation” sustains growth only if innovation keeps accelerating; the singularity is a mathematical consequence, not an observation. The next chapter turns from cities back to firms: how long do companies live?
References
Fan, Y. (2026). Scaling Laws, Allometric Growth and the Statistical Physics of Organisational Metabolism: From Kleiber's Three-Quarter Power Law and Fractal Supply Networks to the Mortality of Firms, Read Beside Classical Chinese Organisational Thought [规模法则、异速生长与组织新陈代谢的统计物理] (Version 1.0.0). 5D Library. https://doi.org/10.5281/zenodo.23788553 · Licensed under Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).